Uniden BCD325P2 Owner's Manual page 96

15. Scroll to 'C-Ch Only Mode' and press E/yes.
16. Scroll to On or Off then press E/yes to save and exit.
17. Scroll to 'Set MOT BandPlan' and press E/yes. See also Edit Band Plan.
18. Scroll to 1 of 3 options and press E/yes.
800/900 Standard - The scanner will use the regular old Motorola band
plan and return to the menu.
800Splinter - The scanner will use the regular old Motorola band plan
and return to the menu.
Custom - Allows you to create a custom band plan for rebranded
systems.
At 'Select Plan' scroll to 'Band Plan 1-6' and press E/yes.
19.
20. At 'Set Base Freq' press E/yes.
21. At 'Input Lower' enter the lower base frequency and press E/yes.
22. At 'Input Upper' enter the upper base frequency and press E/yes.
23. Scroll to 'Set Offset' and press E/yes.
24. At 'Input Offset' enter the offset and press E/yes.
25. At 'Select Polarity' scroll to + or - and press E/yes.
26. Scroll to 'Set Spacing' and press E/yes.
27. Scroll to the step size and press E/yes.
Press Menu to return and repeat for each band plan as needed. Press Menu
28.
three times to return.
29. Scroll to Set Record and press E/yes.
30. Scroll to On or Off and press E/yes to save and exit.
31. Scroll to Set Audio AGC and press E/yes. See also Adjust Audio AGC.
32. Scroll to 'Analog' and press E/yes to toggle on or off.
33. Scroll to 'Digital' and press E/yes to toggle on or off.
34. Press Menu to return.
35. Scroll to P25 Waiting Time and press E/yes.
36. Set the Wait Time from 0 to 1000 ms and press E/yes.
Scroll to Search with Scan and press E/yes.
37.
38. Scroll to Set Quick Key and press E/yes.
Used for 'Search with Scan' only:
1. Scroll to 0-99 or .no for no quick key and press E/yes to save and exit.
96