Uniden BCD325P2 Owner's Manual page 34

S0-9: S0-9: shows the first digit of (systems/sites/search assigned to) the
currently scanned quick key on the left with the blinking second digit
(1-0) on the right in Scan/Receiving Modes.
S0-9: shows the first digit of the system/site/search quick key
assigned to the displayed channel on the left with the second digit
(1-0) on the right in Hold Mode
a non-blinking number on the right indicates the quick key is enabled
waiting to be scanned.
a - (dash) means nothing is assign to the quick key.
an * (asterisk) means the quick key is turned off
appears if the Close Call 'Priority' feature is on in Any Mode except
GPS and Tone-Out.
appears reversed if the Close Call 'Do-Not-Disturb' feature is on in
Any Mode except GPS and Tone-Out.
SCR appears if one or more broadcast/custom screen bands are turned
on in Search/Receive Modes.
REP appears if repeater reverse is turned on in Search/Receive Modes.
6th Line
GRP shows the group quick keys (1-0) for each conventional system/site
with (groups assigned to) the currently scanned quick key blinking in
Scan/Receiving Modes.
GRP shows the group quick key for the displayed channel in Hold
Mode.
• a non-blinking number on the right indicates the quick key is
enabled waiting to be scanned.
a - (dash) means nothing is assign to the quick key.
an * (asterisk) means the quick key is turned off.
WX appears if the weather alert priority feature is on in Any Mode
except GPS and Tone-Out.
GPS alert information appears if connected to a GPS device and receiving
a signal in Scan or Search Modes.
34