Selecting System Channel Groups; Locking/Unlocking Systems; Locking/Unlocking Channels - Uniden BCD396T Owner's Manual

To select or lock out a system that is not assigned to a
key, press and hold
Func
control until the desired system is selected. Then,
continue to hold
Func
or unlock the system.

Selecting System Channel Groups

Within a system, you can assign groups of channels to
a group quick key (see "Setting the Group Quick Key"
on Page 85).
Follow these steps to activate or deactivate a channel
group within a system while scanning.
1. Press to hold on the system (or hold down
Func
then rotate the scroll control to select the
Func
system).
2. Continue to hold
Func
corresponding to the channel group you want to
activate or deactivate.

Locking/Unlocking Systems

Follow these steps to lock out a system so that it does
not scan even if its quick key is selected.
1. While holding down
to select the system.
2. Continue to hold down
out the system. System Locked appears.
3. Repeat Steps 1 and 2 to unlock a system you
have previously locked. System Unlocked
appears.

Locking/Unlocking Channels

Follow these steps to lock out a channel so that it does
not scan even if its system and channel group are
selected.
1. While holding down
to select the system where the channel is stored.
while you rotate the scroll
and press L/O to either lock out
and press the number key
, rotate the scroll control
Func
and press L/O to lock
Func
, rotate the scroll control
Func
Basic Operation
45