Uniden BCD325P2 Owner's Manual page 80

To lock out a channel or frequency quickly press L/O once while the channel or
frequency is in the display to temporary lock out. Quickly press L/O twice to lock out.
To lock out a conventional system/trunked site/search while receiving the system/
site/search quickly press E/yes then L/O once to temporary lock out. Quickly press
L/O twice to lock out.
To store a displayed ID into an Existing Group' (ID Search) press E/yes.
At 'Quick TGID Save?' press .no. See also Storing a Displayed ID.
To store a displayed ID into 'Quick Save' Group' ID (ID Search) press E/yes. At
'Quick TGID Save?' press E/yes.
See also Storing a Displayed ID.
To store a (blinking) CTCSS or DCS tone (for a conventional channel set to analog
only), press
E/yes. At 'Set Found CTCSS/DCS?' press E/yes. Press Scan/Srch to resume.
To store a (blinking) NAC code (for a conventional channel set to digital only), press
E/yes. At 'Set Found P25 NAC?' press E/yes.
Press Scan/Srch to resume.
To store a search frequency (Search with Scan) press E/yes.
Then see Storing a Displayed Frequency.
To toggle the attenuation for a conventional channel on or off Hold on the channel
and press E/yes then 7(att). Press Hold to resume.
To toggle the attenuation for a trunking site on or off Hold on the site and press E/yes
then 7(att). Press Hold to resume.
To toggle the attenuation for a search on or off (Search with Scan) press E/yes then
7(att) while searching (or hold on the search first).
To toggle global attenuation Hold on any channel and press E/yes then press and
hold 7(att).
To toggle the modulation for a conventional channel or trunked site Hold on the
channel/site and press Func then 9(mod). Press Hold to resume.
To toggle the modulation for a service/custom search press Func then 9(mod) while
searching. (or hold first).
To toggle the volume offset for a conventional channel Hold on the channel and
press Func then 5(lvl). Press Hold to resume.
To check for a repeater frequency on a conventional channel Hold on the channel.
Press Func then press and hold 8(rev). Press Hold to resume.
To toggle Intermediate Frequency Exchange for a conventional channel on or off
Hold on the channel and press Func then 4(ifx). Press Hold to resume.
80