Adjust Key Beep; Battery Option; Adjusting The Display Contrast; Set C-Ch Output - Uniden BCD325P2 Owner's Manual

Adjust Key Beep

This setting turns the key beep on or off and adjusts the volume level.
1. Scroll to 'Adjust Key Beep' and press E/yes.
2. At 'Set Level' scroll to 'Level 1-15 or Auto' (the scanner sets the alert beep to
the master volume level) and press E/yes to save and exit.

Battery Option

These settings allow you to turn the battery save option on or off and to set the
battery charge time. The scanner turns off power for 1 second and turns it on for
300 ms when you hold on a channel/frequency that has no activity for more than a
minute.
Note: No Icon will appear in the display to tell you if the battery save feature is
on or off.
1. Scroll to 'Set Battery Save' and press E/yes.
2. Scroll to On or Off and press E/yes to save and exit.
3. Scroll to 'Set Charge Time' and press E/yes.
4. Enter 1-14 (hours) and press E/yes to save and exit.
5. Press Menu to return.

Adjusting the Display Contrast

This setting controls the display's contrast.
1. Scroll to 'Adjust Contrast' and press E/yes.
2. At 'Contrast 1-15' scroll to the preferred contrast level and press E/yes to
save and exit.

Set C-CH Output

Allows you to choose how you want the scanner to handle control channel data
output.
1. Scroll to 'Set C-CH Output' and press E/yes.
2. Scroll to 1 of 3 options and press E/yes.
Off - The scanner will not output the control channel data.
On - The scanner will output the control channel data.
Extend - The scanner will output the control channel data along with any
description.
37