Locking/Unlocking Systems; Locking/Unlocking Channels; Id Scan/Id Search Mode - Uniden BCD396T Owner's Manual

1. Press
then rotate the scroll control to select the
Func
system).
2. Continue to hold
corresponding to the channel group you want to
activate or deactivate.

Locking/Unlocking Systems

Follow these steps to lock out a system so that it does
not scan even if its quick key is selected.
1. While holding down
to select the system.
2. Continue to hold down
out the system. SYSTEM LOCKED appears.
3. Repeat Steps 1 and 2 to unlock a system you
have previously locked.

Locking/Unlocking Channels

Follow these steps to lock out a channel so that it does
not scan even if its system and channel group are
selected.
1. While holding down
to select the system where the channel is stored.
2. Release
to hold on the system.
3. Rotate the scroll control to select the channel you
want to lock or unlock.
4. Press L/O to lock or unlock the channel.
You can also lock out an active channel by pressing
L/O while the scanner is stopped on the channel.

ID Scan/ID Search Mode

While you are scanning a trunked system, the scanner
can be in either ID Scan or ID Search mode:
46
to hold on the system (or hold down
Func
Func
then press Hold within 2 seconds
Func
and press the number key
, rotate the scroll control
Func
and press L/O to lock
Func
, rotate the scroll control
Func
Basic Operation