Set Quick Key; Set Start-Up Key; Set Number Tag; Set Lockout - Uniden BCD325P2 Owner's Manual

Set Quick Key

Set Start-up Key

Set Number Tag

Set Quick Key
Assigns a quick key to a system. The system will be scanned when its quick key is
enabled. The default setting is no quick key.
1. Scroll to 'Set Quick Key' and press E/yes.
2. Scroll to the quick key number (0-99 or .no for no quick key) you want
assigned to the system and press E/yes to save and exit.
Note: Pressing the first number of a 2-digit quick key will get you closer, 1 for
10, 2 for 20, etc. then scroll to second digit.
Set Start-up Key
Allows you to turn on the scanner with the system unlocked using the Startup
Configuration. The default setting is no startup key.
1. Scroll to 'Set Startup Key' and press E/yes.
2. Scroll to (or enter) the startup key number (0-9 or .no for no startup key) you
want assigned to the system and press E/yes to save and exit.
Set Number Tag
Allows you to number a system. The default setting is no number tag (blank). See
also Using Number Tags.
1. Scroll to 'Set Number Tag' and press E/yes.
2. Enter the number tag (0-999) and press E/yes to save and exit.

Set Lockout

Determines whether a system will be scanned or not (even if the quick key for the
system is turned on). 'Temporary L/O' means until you cycle power. The default
setting is unlocked.
1. Scroll to 'Set Lockout' and press E/yes.
2. Scroll to 'Temporary L/O', 'Unlocked' or 'Locked' and press E/yes to save
and exit.
Note: You can also toggle system lockout by holding on the system in scan
mode and pressing E/yes then L/O.
Set Lockout
Set Hold Time
Set Selay Time
43
Set Audio AGC
P25 Waiting Time