Id Scan/Search (No Edacs Scat); Set Delay Time; Edit Fleetmap (Motorola Type I Systems Only) - Uniden BCD325P2 Owner's Manual

1. Scroll to 'Set Number Tag' and press E/yes.
2. Enter the number tag (0-999) and press E/yes to save and exit.

ID Scan/Search (no EDACS SCAT)

Sets whether the scanner scans the programmed ID groups (ID Scan) or searches
for all IDs (ID Search) in a trunking system. The default setting is ID search.
1. Scroll to 'ID Scan/Search' and press E/yes.
2. Scroll to 'ID Scan' or 'ID Search' and press E/yes to save and exit.
Note: You can also toggle this while scanning each trunked system by
pressing Func then Scan/Srch.

Set Delay Time

Allows you to select a preprogrammed fleetmap or program a fleetmap for Motorola
Type I systems. You must program a system fleet map in order for the scanner to
properly track and display talk group ID's. .
1. Scroll to 'Set Delay Time' and press E/yes.
2. Scroll to the desired delay time (-10, -5, -2, 0, 1, 2, 5, 10, or 30 secs.) and
press E/yes to save and exit.

Edit Fleetmap (Motorola Type I systems only)

Allows you to select a preprogrammed fleetmap or program a fleetmap for Motorola
Type I systems. You must program a system fleet map in order for the scanner to
properly track and display talkgroup ID's.
1. Scroll to 'Edit Fleetmap' and press E/yes.
2. To select a Preset Fleetmap, scroll to 'Preset' and press E/yes.
3. Scroll to the number of the preset fleetmap and press E/yes to save and exit.
See Preset Fleetmaps.
4. To program a Custom Fleetmap, scroll to 'Custom' and press E/yes.
5. At 'Block 0' scroll to the size code (0-14) and press E/yes. See Size Codes.
6. The scanner will prompt you to the next available block so you can scroll to
and enter the next size code (0-14) then press E/yes.
7. Repeat for each block as needed (0-7) and you will return to the 'Edit Sys
Option' menu.
Note: If you select size code 12, 13, or 14, these restrictions apply:
• 12 can only be assigned to Blocks 0, 2, 4 or 6.
• 13 can only be assigned to Blocks 0 and 4.
47