Set Frequencies - Uniden BCD325P2 Owner's Manual

For Standard Motorola 800 MHz rebanded systems set Band Plan 1 and Band Plan
2 as follows:
Band Plan Lower Base Freq
1 851.025
2 851.0125
Set Site Type (EDACS only)
This is where you select a Wideband or Narrowband EDACS site.
1. Scroll to 'Set Site Type' and press E/yes.
2. Scroll to 'Wide (Standard)' or 'Narrow' and press E/yes to save and exit.
Note: EDACS Wide is the same as EDACS Standard and uses a 9600 baud
control channel. EDACS Narrow-band sites use a 4800 baud control channel.

Set Frequencies

This is where you program or change the trunking frequencies, delete frequencies, or
lock them out.
1. To Program New Frequencies, scroll to 'Set Frequencies' and press E/yes.
2. At 'Sel Frequency' scroll to 'New Frequency' and press E/yes.
3. At 'Input Frequency' enter the frequency and press E/yes. (For EDACS and
LTR sites only, at 'Input LCN' enter the LCN number and press E/yes.)
4. Scroll to 'New Frequency' press E/yes to enter more frequencies.
5. Press Menu twice to return to the 'Edit Site' menu.
6. To Edit Frequencies, scroll to 'Set Frequencies' and press E/yes.
7. At 'Sel Frequency' scroll to the frequency you want to edit and press E/yes.
8. Scroll to' Edit Frequency' press E/yes.
9. Edit the frequency and press E/yes to save and exit.
For EDACS and LTR sites only:
1. At 'Input LCN' enter the LCN number and press E/yes.
2. Scroll to 'Set Lockout' press E/yes. Set the lockout status and press E/yes to
save and exit.
3. Scroll to' Delete Frequency' press E/yes.
4. At 'Confirm Delete' press E/yes. You will return to the 'Edit Site' menu.
5. Press Menu twice to return to the site menu.
Upper Base Freq Offset
854.0000 440
868.9875 0
53
Polarity Spacing
+ 25 kHz
+ 25 kHz