Uniden BCD325P2 Owner's Manual page 31

Top Line
Displays when you press the Func key to select Function Mode in
Any Mode.
Displays and blinks when you press and hold the Func key to lock
Function Mode in Any Mode.
HOLD HOLD appears in Hold Mode.
L/O Appears if the system/site/group/channel/frequency/search/location is
locked out in Hold Mode.
Displays the system number tag and channel number tag (if
programmed) in Function Mode.
PRI PRI appears in priority mode and blinks in priority plus mode in Scan
Mode.
Displays to show the signal strength of the receiving channel or
frequency.
Appears if the keylock is on in Any Mode.
• Appears and blink (with a tone) if the battery is low in Any
Mode.
• GPS appears if the scanner is connected to a GPS device
and receiving a signal in Any Mode.
shows the battery level when you press Vol in Any Mode.
•
2nd Line
• shows the name of the currently scanned site or conventional system in
Scan Mode.
• shows the name of the currently searched custom/service search in
Search Mode.
• will alternate the conventional system name and channel group name for
a conventional system in Scan Receive/Hold Modes.
• will alternate the site name and channel group name for a trunking system
in Scan Receive/Hold Modes.
• will alternate the custom search name and system name for a trunking
system for a 'C-Ch only Search' in Search Receive/Hold Modes in
display modes 1 and 3.
• will alternate the custom search name and 'SID' for a trunking system for
a 'C-Ch only Search' in Search Receive/Hold Modes in display mode 2.
31