Storing a Displayed ID in ID Search Mode
1.
To store a displayed ID into an existing group during ID Search, press E/yes.
2.
You will see 'Quick TGID Save?' in the display then press .no.
3.
At the 'Select Group' prompt, scroll to the group where you want to store the
ID and press
E/yes.
4.
After storing the ID, you will be at the 'Edit Channel' menu to complete the
settings for the new channel.
5.
If you don't want to edit the channel settings or are done editing the channel,
press Scan/Srch to return to scanning.
To store a displayed ID into a 'Quick Save Group' during ID Search, press E/
6.
yes.
7.
You will see 'Quick TGID Save?' in the display then press E/yes again.
8.
The scanner stores the ID into a (created) channel group called 'Qck Save
Grp' and you will be at the 'Edit Channel' menu to complete the settings for
the new channel.
9.
If you don't want to edit the channel settings or are done editing the channel,
press Scan/Srch to return to scanning.
Note: If the ID is already stored in the group, 'TGID Exists' Accept? (Y/N)'
appears. Press .no to return to searching (or search hold) or E/yes to go to the
'Edit Channel' menu.
USING NUMBER TAGS
To View Number Tags for a Channel and/or System press HOLD to hold on the
channel or system.
82