Uniden BCD325P2 Owner's Manual page 33

P25 appears if the channel is receiving digitalized voice in Scan
Receive/Hold Modes.
LNK appears if the channel is receiving data in Scan Receive/Hold
Modes.
DAT appears if the control channel is being received in Scan Receive/
Hold Modes.
ENC appears if the channel is receiving encrypted voice in Scan
Receive/Hold Modes.
4th Line - Display Mode 2
• shows the acquired control channel frequency of a trunking site in Scan
Mode.
• shows the modulation and attenuation (if on) of a non-acquired trunked
site in Scan Mode.
• shows the ID for a trunking site in Scan Receive/Hold Modes.
• shows the frequency for a conventional channel in Scan Receive/Hold
Modes.
• shows the receive modulation of the custom/service search in Search
Mode.
ATT appears if the search is attenuated in Search Receive/Hold Modes.
shows the tone code (if received) for a conventional frequency if
programmed and blinks in CTCSS/DCS/NAC search mode in Scan
Receive/Hold Modes.
IFX appears if intermediate exchange is on for the channel in Function
Hold Mode.
shows the volume offset for the channel in Function Hold Mode.
4th - Display Mode 3
shows only the trunking activity indicators for a trunked system in Scan,
Receiving, or Hold Modes. Conventional system/search display is the same as
Display mode 1.
5th Line
33