Uniden BCD325P2 Owner's Manual page 111

Hide thumbs Also See for BCD325P2:
Table of Contents

Advertisement

Notes: For two-tone pages, enter the tones (in Hz) for tone A and tone B.
For one-tone pages using short tones between 1.25 and 3.75 seconds, enter
tone for tone A and 0 for B.
For long-tone pages, such as group pages of more than 3.75 seconds, enter 0
for A and the tone for B.
To search for tones, leave the tones for A and B at 0.
1.
Scroll to 'Edit Tone A' and press E/yes.
2.
Enter the tone and press E/yes to save and exit.
Scroll to 'Edit Tone B' and press E/yes.
3.
4.
Enter the tone and press E/yes to save and exit.
5.
Press Menu to return.
6.
Scroll to 'Set Delay Time' and press E/yes.
7.
Scroll to one of 3 settings and press E/yes to save and exit.
Off - the scanner resumes standby as soon as the carrier drops after a
page.
1-30 - (seconds): the scanner resumes standby mode after the carrier
drops and the selected time expires.
Infinite - you must press Hold after a page to resume standby mode.
8.
Scroll to 'Set Alert' and press E/yes.
9.
Scroll to 'Set Alert Tone' and press E/yes.
At 'Set Tone' scroll to the alert (Alert 1-9 or Off) and press E/yes.
10.
11.
At 'Set Level' scroll to 'Level 1-15 or Auto' (the scanner sets the alert beep to
the master volume level) and press E/yes.
12.
Scroll to 'Set Alert Light' and press E/yes.
13.
Scroll to On, Off, Slow Blink, or Fast Blink and press E/yes.
14.
Press Menu to return.
15.
Scroll to 'Set Record' and press E/yes.
16.
Scroll to On or Off and press E/yes to save and exit.
17.
Press Menu to return then scroll to 'Tone-Out 2' and repeat to program more
tones.
111

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents