Edit Name (No Edacs Scat); Set Quick Key; Set Start-Up Key; Edit Band Plan (Motorola Custom/P25/Vhf/Uhf Only) - Uniden BCD325P2 Owner's Manual

Edit Name

Set Quick Key

Set Start-up Key

Edit Band Plan
Set Site Type
Set Frequencies
Set Modulation

Edit Name (no EDACS SCAT)

Assigns a name to the site.
1. Scroll to 'Edit Name' and press E/yes. See Entering Text.
Set Quick Key
Assigns quick key to a site and is scanned when the key is turned on. The default
setting is no quick key.
1. Scroll to 'Set Quick Key' and press E/yes.
2. Scroll to the quick key number (0-99 or .no for no quick key) you want
assigned to the site and press E/yes.
Note: Pressing the first number of a 2-digit quick key will get you closer, 1 for
10, 2 for 20, etc. then scroll to second digit.
Set Start-up Key
Allows you to turn on the scanner with the site unlocked using the Startup
Configuration. The default setting is no startup key.
1. Scroll to 'Set Startup Key' and press E/yes.
2. Scroll to (or enter) the startup key number (0-9 or .no for no startup key) you
want assigned to the site no to save and exit.
Edit Band Plan (Motorola Custom/P25/VHF/UHF
only)
Band plans are required so the scanner can correctly determine the voice channel
frequencies.
For P25 Systems there are two types of P25 systems: Explicit mode and Implicit
mode. Explicit mode systems include all information needed to determine voice
frequencies on the control channel. For Explicit mode systems, leave all entries
Set Attenuator
Set Lockout
Set Hold Time
Set Location Info
P25 Waiting Time
Delete Site
New Site
51