Weather Operation Menu - Uniden BCD325P2 Owner's Manual

Hide thumbs Also See for BCD325P2:
Table of Contents

Advertisement

3.
Scroll to 'Set Lockout' and press E/yes.
4.
Scroll to 'Unlocked', 'Temporary L/O', or 'Lockout' and press E/yes to save
and exit.
5.
Scroll to 'Set Hold Time' and press E/yes.
6.
Enter the hold time (0-255 seconds) you desire and press E/yes to save and
exit.
Note: If you want to store any of the hits, set a hold time long enough to get to
the E/yes button when the frequency appears in the display.

WEATHER OPERATION MENU

Your scanner allows you to search for a local NOAA weather broadcast and set it
to alert when a SAME weather alert is broadcast on a NOAA weather channel. You
can also program FIPS codes into the scanner and use weather alert priority that will
check the weather channel every 5 seconds for a weather alert signal.
To Edit Weather Options, press Menu.
1.
Scroll to 'WX Operation' and press E/yes.
2.
Scroll to the settings and options below and press E/yes.
3.
Press Scan/Srch to return to scanning when done with editing.
Weather Scan
Weather Alert
Priority
Weather Scan The scanner starts scanning the preprogrammed weather
frequencies and stops on the first good signal. If the signal is lost, the scanner
resumes searching for another weather transmission.
Note: You can also turn on weather scan by pressing and holding the WX
button in scan or search modes.
1.
Scroll to 'Weather Scan' press E/yes.
2.
Press Scan to exit.
In Weather Scan Mode:
1.
To search for another weather channel turn the scroll control.
2.
To start Weather Alert press Func then 0(wx).
3.
Scroll to 'Alert Only', 'SAME 1-5', or 'All FIP' and press E/yes.
4.
To return to Weather Scan from Weather Alert press Func then 0(wx).
Program SAME
Set Attenuator
Set Delay Time
Set Audio AGC
107
Weather Alert

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents