Edit Name; Edit Frequency Or Tgid; Set Audio Type (Conventional/Motorola Only) - Uniden BCD325P2 Owner's Manual

Hide thumbs Also See for BCD325P2:
Table of Contents

Advertisement

2.
At 'Select System' scroll to the system where the channel is and press E/yes.
3.
Scroll to 'Edit Group' and press E/yes.
4.
Scroll to the Group that has the channel you want to edit and press E/yes.
5.
Scroll to 'Edit Channel' press E/yes.
6.
At 'Select Channel' scroll to the channel you want to edit and press E/yes.
7.
You can also pressE/yes when the channel is displayed in scan mode. (Press
.no to cancel storing a CTCSS/DCS tone or NAC code if asked).
8.
Scroll to the options below and press E/yes.
9.
Press Scan/Srch when editing is finished.

Edit Name

Edit Frequency/TGID
Set Audio Type
Set Number Tag
Set Modulation
Edit Name
If you do not enter a channel name, the scanner displays the frequency for
conventional systems or the talk group ID for trunked systems when it stops on a
channel.
1.
Scroll to 'Edit Name' and press E/yes. See Entering Text.
2.
Press E/yes to save and exit.

Edit Frequency or TGID

See also 'Entering IDs'.
1.
Scroll to 'Edit Frequency or TGID' and press E/yes.
2.
Enter the frequency or ID and press E/yes to save and exit.

Set Audio Type (conventional/Motorola only)

Choose 'Digital Only' or 'Analog Only' according to the signal type. Select 'All' if this
channel might contain both digital and analog signals.
Note: If you are sure the channel is analog, set the channel to 'Analog
Only'. This will prevent the 'P25 Waiting Time' for the conventional system
or Motorola site from losing the first part of the transmission up to the wait
time you set there. You will not see CTCSS/DCS/NAC tones for conventional
channels in the display (mode 2) with the 'Audio Type' set to 'All'.
Set Attenuator
Set Priority
Set Alert
Set Lockout
61
Volume Offset
Copy/Paste Channel
Delete Channel
New Channel

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents