Uniden BCD325P2 Owner's Manual page 119

Direct entry (Quick Save) not allowed for I-Call IDs.
System Type
Motorola Type I Systems
B=Block (0-7)
FF(F)=Fleet
S(S)=Sub-Fleet
N=Decimal Number
i=I-Call ID
Motorola Type II Systems
N=Decimal Number
H=Hexadecimal Character
i=I-Call ID
P25 Systems
N=Decimal Number
H=Hexadecimal Character
i=I-Call ID
EDACS Systems
AA=Agency (00-15)
FF=Fleet (00-15)
S=Sub-Fleet (0-7)
N=Decimal Number
i=I-Call ID
LTR Systems
A = Area number (0 or 1)
RR = Home Repeater Number
(01-20)
U = Decimal Number (000-254)
Type II Special Status Bits
Type II Motorola Smartnet systems use these status bits for special transmissions
such as emergency, patches, DES/DVP scrambled transmissions, and multiselects.
Motorola trunking radios directly interpret them for their special functions, thus no
difference is noticed by the person with the radio. The scanner however interprets
these special talk group status bits as different talk groups entirely. Below is the
conversion chart for these special status bits.
TGID Format
BFF-SS Normal ID
BFFF-S Normal ID (Fleet is 100-127)
BFF- Fleet ID
BFFF- Fleet ID (Fleet is 100-127)
B- Block ID
NNNNN
iNNNNN (size code 0)
Decimal Format
NNNNN
iNNNNN
Hexadecimal Format
HHH
iHHHH
Decimal Format
NNNNN
iNNNNNNNN
Hexadecimal Format
HHHH
iHHHHHH
AFS Format
AA-FFS Normal ID
AA-FF- Fleet ID
AA- Agency ID
Decimal Format
NNNN
iNNNNN
A-RR-UUU Normal ID
A-RR- Repeater ID
119