JAI GO-5000M-USB User Manual page 49

Sequence ROI Width
Sequence ROI Height
Sequence ROI Offset X
Sequence ROI Offset Y
Sequence ROI Gain All
Sequence ROI Gain Red
Sequence ROI Gain Blue
Sequence ROI Exposure
Time
Sequence ROI Black Level
Sequence ROI LUT enable
Sequence ROI H Binning
Sequence ROI V Binning
Sequence Repetition
Command Sequence Index
Current Sequence Index
Sequence LUT Mode
Reset Sequence Index
Note 1: If the binning mode is used, the maximum value is changed.
Note 2: Only Bayer model
Note 3: Only Monochrome model
GO-5000M-USB / GO-5000C-USB
16～2560 (Note 1)
1～2048 (Note 1, Note3)
2～2048 (Note 2)
0～2560 (Note 1)- [Sequence
ROI Width]
0～2048(Note1) - [Sequence
ROI Height]
100～1600
*2
-4533～37876
*2
-4533～37876
10～8000000
-256～255
0 (Disable)
1 (Enable)
*3
1, 2, 4 (3 is disable)
*3
1, 2, 4 (3 is disable)
1～255
Index 1～10
Index 1～10
Gamma
LUT
No (EXE command)
- 47 -
Off: Stop a sequence operation
at the current index.
<Set to each Index>
Set the width value
<Set to each Index>
Set the height value
<Set to each Index>
Set the offset value.
<Set to each Index>
Set the offset Y.
<Set to each index>
Set the gain value.
<Set to each Index>
Set the Gain Red value.
<Set to each Index>
Set the Gain Blue value.
<Set to each Index>
Set the exposure time value.
<Set to each index>
Set the black level value.
<Set to each Index>
Set the disable or enable of LUT.
If it is set to enable, the
function is selected in the
Sequence LUT mode.
<Set to each Index>
Set the H Binning value.
<Set to each Index>
Set the V Binning value.
<For Trigger Sequence Mode>
Set the repeat number of the
sequence.
<For Command Sequence
Mode>
Set the performed index.
<READ only>
Refer to the current Sequence
Index.
Set the function if Sequence ROI
LUT is set to enable.
Set the value on Gamma or LUT
control.
Reset the Sequence Index to 0.
At the same time, the Frame
Count is also initialized.