JAI GO-5000M-USB User Manual page 66

WB Gain
WB Area
WB Range
White Balance
Detection
Blemish
Compensation
Comp.
Numbers
ALC
Gamma
LUT
HDR
Dark compression
Shading Compensation
6-Pin
Connector
Power
USB Bus
Power
Lens mount
Flange back
Optical filter
Operating temperature/Humidity
Performance guaranteed
Storage Temp. / Humidity
Regulation
Housing Dimensions
Weight
Note1): Usable performance will be up to
Note2): Histogram integrity is guaranteed with up to +12dB gain applied.
Note3): Approximately 5 minutes pre-heating is required to achieve these specifications.
Note4): The above specifications are subject to change without notice.
GO-5000M-USB / GO-5000C-USB
Complement by adjacent pixels (Continuous blemishes are not compensated)
AGC and auto exposure can be combined and automatically controlled
32 points (for monochrome) and 16 points (for color) can be set
4 settings, Level 1, 2, 3 and 4
Block Comp. (20 x 16 locks)
Block size: 128 x 128 pixels
Input range
Current
Power
Input range
Current
Power
Protection glass: Not provided
CE (EN61000-6-2 and EN61000-6-3), FCC part 15 class B, RoHS, WEEE
1 second.
—
—
—
—
Detect white blemish above the threshold value
(Black blemish is detected only by factory )
256 pixels (for user adjustment)
0.45, 0.6 and 1.0 (OFF) (3 steps are available)
Dark Compression (ON) / Linear (OFF)
Flat Field
DC+12V to +24V ± 10% (At the input terminal)
240mA (At 12V input, Full pixels)
2.8W (At 12V input, Full pixels)
DC 5V ± 10%
720mA (At 5V input, Full pixels)
3.6W (At 5V input, Full pixels)
C mount Rear protrusion of the lens is less than 10 mm
17.526 mm, Tolerance: 0 to -0.05 mm
-5C to +45C / 20 – 80% (non-condensing)
-25C to +60C/20% to 80 % (non-condensing)
29 x 29 x 52 mm (W x H x D) (excluding protrusion)
- 64 -
R / B : -7dB to +15dB, 1 step = 0.01dB
4 x 4
3000K ～ 9000K
OFF, Continuous, Once
—
Flat Field, Color shading
Block comp. (20 x 16 blocks)
Block size: 128 x 128 pixels
IR cut filter (Half value is 670 nm)
46 g