Cold Boot - Symbol Series 3300 System Administration Manual

Operating the Series 3300

Cold Boot

A cold boot fully resets the system and clears memory, including clearing the RAM
disk. Any programs and data that have been stored in memory or on RAM Disk
are deleted. The NVM (Application EEPROM), however, is not affected.
Caution
This procedure erases all data and programs residing in dynamic memory and
RAM Disk. All contents of the RAM disk will be lost.
To perform a cold boot, power off the system and then follow these steps.
On the 56-key keyboard:
1. Press and hold On/Off.
2. Press and hold Enter, F4, and F1.
3. Release On/Off, and then release Enter, F4, and F1.
On the 35-key keyboard:
1. Press and hold On/Off.
2. Press and hold Space, Func, and UpArrow.
3. Release On/Off and then release Space, Func, and UpArrow.
The 3300 will display a copyright message, amount of RAM and expanded
memory. Other messages will be displayed as well, depending on the system
configuration.
3 -5