Symbol Series 3300 System Administration Manual page 40

13. When the transmission is complete, the 3300 displays a transmission status
screen:
Program loader
Status 0000
A Status of 0000 (all zeros) indicates that the transfer was successful. Other
status values are described Appendix C.
Ending Communications
To return to the Command Mode main menu, press Clear on the 3300.
Turn the terminal off and detach the communications cable.
To start the software running, reboot the terminal using the cold boot sequence
(refer to Chapter 3):
56-key: On/Off and Enter+F1+F4
35-key: On/Off and Space+Func+UpArrow
Maintaining the Series 3300
2 - 17