Booting The 3300; Warm Boot - Symbol Series 3300 System Administration Manual

Series 3300 System Administration Manual

Booting the 3300

Powering on the Series 3300 does not boot the system, and so does not initialize
either the program or data. When it is necessary to initialize the 3300, either a
warm boot or a cold boot must be performed.

Warm Boot

A warm boot resets the operating system while preserving the program and data
on the RAM disk. This process is similar to pressing the Ctrl+Alt+Del keys on a PC,
except that it does not clear the system's memory. To perform a warm boot, power
off the system, and then follow these steps.
On the 56-key keyboard:
1. Press and hold down On/Off.
2. Press and hold L and Shift.
3. Release On/Off, and then release L and Shift.
On the 35-key keyboard:
1. Press and hold down On/Off.
2. Press and hold / and +.
3. Release On/Off, and then release / and +.
The 3300 then displays copyright, RAM size, expanded memory RAM size, and so
on, depending on the system's configuration.
3 - 4