Symbol Series 3300 System Administration Manual page 38

Once erasing the EEPROM is completed, the program prompts for the com-
munications parameters.
7. Baud Rate. The baud rate screen is displayed:
Comm Parameters
Baud
4 9600
Use the up or down cursor key to scroll through the list of baud rates. When
the correct rate is displayed (38400 is recommended), press Enter.
8. Data Bits. The data bits screen is displayed:
Comm Parameters
Data Bits
7
Press 7 (recommended) or 8 to specify the data bits, or use the up and down
arrows. When the correct value is displayed, press Enter.
Note
If you select 8 data bits, the program selects "No parity" and skips the next step.
9. Parity. If you selected 7 data bits, the parity screen is displayed:
Comm Parameters
Parity
Odd
Press the first letter of a parity option (Even, Odd, None, Space, or Mark), or
use the up and down arrows to display a parity option, and press Enter.
Maintaining the Series 3300
2 - 15