Symbol Series 3300 System Administration Manual page 36

.
Figure 2 - 4 Communication and Charger Connections
Warning
This procedure is not approved for and should not be performed in potentially
hazardous environments.
1. Power OFF the 3300 and host PC.
2. Attach the male connector end to the 3300 and the female end to the host's
serial port (Figure 2-4).
3. Power up the PC and start the communication program. If you use the sendhex
command with the null modem connected to COM2, enter:
cd \
sendhex pgmname 38400 com2
Do not include the .hex extension on the program name.
Maintaining the Series 3300
2 - 13