Table of Contents
Advertisement
1.5 Labeling and sealing
1.5.1 The upper cover of the dosimeter is inscribed with the name, the
symbol of the device, the trademark of the producer enterprise, the ingress
protection rating of the dosimeter, and the pattern approval mark of
measuring instruments
A serial number and a manufacture date are inscribed on the lower
cover.
1.5.2 Sealing is performed by the producer enterprise.
The device is sealed with a special film seal located in the battery
compartment. It covers the screw heads, whereas the screws fasten the
lower cover.
Removal of seals and repeated sealing is performed by the company in
charge of repair and verification of the dosimeter.
1.6 Packing
The dosimeter kit (the device, the operating manual and the leather
case) is delivered in the cardboard box.
25
Advertisement
Table of Contents
