Labeling And Sealing; Packing - ECOTEST PRD GUARDER DKG-24 Operating Manual

the device, the GMD displays the readings of DER, flux
intensity, intensity flow histogram, statistical error by gamma
channels.
If photon ionizing radiation DER exceeds the value of
50 μSv/h, the GSDUh automatically turns off, and the DER
value is calculated from the GSDUl, which runs constantly. The
photon ionizing radiation DE is also calculated from the GSDUl.
The DPM consists of the non-volatile memory, which
stores entries of the events log.

1.5 Labeling and sealing

1.5.1 The upper cover and the panel of the device is
inscribed with the name and a symbol of the device, the ingress
protection rating and the manufacturer's trademark.
1.5.2 The lower cover of the device contains the factory
serial number and the date of manufacture according to the
company's numbering system.
1.5.3 Sealing of the device is performed by the
manufacturer.
1.5.4 Removal of seals and repeated sealing is performed
by the company after repair and calibration of the device.

1.6 Packing

1.6.1 The device in the housing, the connecting cable, the
hex key, the operating manual and the software on the mini CD
are placed in a dust- and moisture-proof case.
1.6.2 The case with the device kit placed in it is put in a
cardboard packing box, which is glued up on both sides with a
plastic film with a sticky layer. The box is placed in a
polyethylene cover, which is sealed. To reduce the cost of the
device, a cardboard packaging option can be used.
14