Table of Contents
Advertisement
If the alarm clock is on, and the current time coincides with the alarm
clock activation time, the alarm clock will be activated and the dosimeter
will start generating the alarm clock signal – typical audio and/or vibration
signals, in all operating modes and submodes of the dosimeter, except for
the submode of time and date correction. The alarm clock symbol will be
blinking at that. The alarm clock goes off even if the dosimeter is off.
The alarm clock signal can be switched off with a short press of the
MODE or the THRESHOLD button in any operating mode or submode of
the dosimeter, but for the submodes of threshold level new values input and
the mode of measurement results viewing. If the alarm clock signal is not
disabled using the buttons, it turns off automatically in 1 minute after
activation.
If the dosimeter was off before the alarm clock goes off, the dosimeter
enters the clock mode. The dosimeter automatically turns off as soon as the
alarm clock signal stops ringing (in 1 min). If the user turns off the alarm clock
signal before it stops ringing, the dosimeter remains on.
95
Advertisement
Table of Contents
