ECOTEST MKS-05 TERRA Operating Manual page 37

2.3.3.2 Switching the dosimeter on/off
Press shortly the MODE button to switch the dosimeter on. A short
vibration-audio signal and symbols displayed on the LCD show that the
dosimeter is on.
Press the MODE button once again and hold it pressed for circa six
seconds to switch the dosimeter off.
2.3.3.3 General algorithm of the dosimeter operation control
The general algorithm of the dosimeter operation control is carried out in the
following way.
After the dosimeter is switched on, it enters the mode of photon-
ionizing radiation DER measurement, which is shown by "γ" symbol and
"µSv/h" dimension of the measured quantity. Each short press of the
MODE button switches the dosimeter from one mode to another in the
following order:
- the mode of photon-ionizing radiation DER measurement (it is set as
the first one when the dosimeter is switched on);
36