Table of Contents
Advertisement
A short press on the THRESHOLD button makes it possible to view
the previous measurement result that has been saved before the
measurement result, which is displayed on the LCD now. The LCD of the
dosimeter displays the measurement object number and the time of
measurement performance along with each measurement result.
To exit the mode of measurement results viewing stored in the
nonvolatile memory, press and hold the THRESHOLD button (circa 6 seconds)
until the dosimeter enters the mode of photon-ionizing radiation DER
measurement.
To clear the measurement results stored in the nonvolatile memory,
simultaneously press and hold the MODE and the THRESHOLD buttons
until the "CLr" and the "Arch" symbols appear on the LCD of the dosimeter
(Figure 31).
106
Advertisement
Table of Contents
