Table of Contents
Advertisement
When a digit is blinking, it means that its value can be programmed.
Use the THRESHOLD button to set the required value of the blinking digit.
Successive short presses and releases of the THRESHOLD button change
this value per unit. A long press of the THRESHOLD button starts
automatic change of this value, which is stopped after the button is released.
A short press of the MODE button fixes the value of the digit (it stops
blinking) and allows presetting the value of the next digit, which starts
blinking at that. All other digits are programmed likewise.
A short press of the MODE button after the last digit has been
programmed, fixes a new value of the alarm threshold level in the
nonvolatile memory of the dosimeter. If it has been fixed, a new value of
the threshold level blinks three times on the LCD, and the dosimeter returns
to the mode of indication of photon-ionizing radiation DE accumulated
value and DE accumulation time.
64
Advertisement
Table of Contents
