Table of Contents
Advertisement
When digits are blinking, it means that their values can be
programmed. Use the THRESHOLD button to set the required value of the
digit. Successive short presses and releases of the THRESHOLD button
change this value per unit. A long press of the THRESHOLD button starts
automatic change of this value, which is stopped after the THRESHOLD
button is released.
A short press of the MODE button fixes the values of the minute digits
(they stop blinking) and allows presetting the values of the hour digits,
which start blinking at that. The hour digits are programmed with the help
of the THRESHOLD button in a similar way to the minute digits
programming.
A short press of the MODE button fixes a new time value in the
dosimeter's memory. The new time value blinks three times on the LCD of
the dosimeter to show that it has been fixed. A year is then displayed on the
LCD (Figure 23).
86
Advertisement
Table of Contents
