Table of Contents
Advertisement
The low-order digit of the object number is blinking and shows that its
value can be programmed. Use the THRESHOLD button to set the required
value of the blinking digit. Successive short presses and releases of the
THRESHOLD button change this value per unit. A long press of the
THRESHOLD button starts automatic change of this value, which is
stopped after the button is released.
A short press of the MODE button fixes the value of the digit (it stops
blinking) and allows presetting the value of the next digit, which starts
blinking at that. Other digits are programmed likewise.
As soon as the third (last) digit is programmed, the DER measurement
result, the measurement object number, and the date and time of
measurement are saved in the nonvolatile memory. If the information is
saved, the measurement value under saving blinks three times on the LCD
of the dosimeter, and it returns to the mode of photon-ionizing radiation
DER measurement.
Caution! If the submode of measurement result saving is paused for
more than 30 s (the user presses no buttons of the dosimeter), the
58
Advertisement
Table of Contents
