Table of Contents
Advertisement
The mode of clock has the submode of time and date correction.
The mode of alarm clock has the submode of programming the time of
alarm activation.
The mode of measurement results viewing stored in the nonvolatile
memory has the submode of measurement results clearing.
2.3.3 Operation procedure of the dosimeter
2.3.3.1 Dosimeter's buttons
The THRESHOLD (4) and the MODE (5) buttons are used to operate
the dosimeter (Figure 1).
The MODE button is used to switch on/off the dosimeter and change
its operating modes.
The THRESHOLD button is used to change the operating submodes of
the dosimeter within one operating mode, as well as to correct the numeric
values of the threshold levels and other parameters of the dosimeter
operation.
35
Advertisement
Table of Contents
