Table of Contents
Advertisement
communications with the PC can be stopped only with the help of the controls of the
custom-made software „Computer-aided programming and operation
logging of the dosimeter" („Cadmium-ECOMONITOR").
2.3.3.13 The mode of measurement results viewing stored in the
nonvolatile memory
2.3.3.13.1 If the nonvolatile memory of the dosimeter contains
measurement results, this mode can be entered from any other operating
mode of the dosimeter with the help of a short press of the MODE button.
This mode follows the mode of data communications control with the PC.
In the mode of measurement results viewing stored in the nonvolatile
memory the dosimeter's LCD displays the following information (Figure 29):
- "rEAd" (1) and "Arch" (2) symbols (an indication of this mode);
- alarm clock symbol (3) (if the alarm clock is on);
- alarm type symbol (4);
- battery status symbol (5);
- number of measurement results stored in the nonvolatile memory (6).
101
Advertisement
Table of Contents
