1.5 Labeling and sealing
1.5.1 The upper cover of the dosimeter is inscribed with the name, the symbol of the
device, the trademark of the producer, the ingress protection rating of the dosimeter, and the
approval pattern of measuring instruments.
A factory number and a manufacture date are inscribed on the lower cover.
1.5.2 Sealing is performed by the producer.
The device is sealed with a special film seal located in the battery compartment and
covering the screw heads, whereas the screws fasten the lower cover.
Removal of seals and repeated sealing is performed by the company in charge of repair
and verification.
1.6 Packing
The dosimeter kit (the device and the operating manual) is delivered in the
cardboard box. Cardboard and polymer (blister) combination is permitted.
18