Table of Contents
Advertisement
Connecting Manually
1.
On the Display screen, click Setup.
2.
Click Camera Setup, and then click IP Cameras.
3.
Click Manually Add Camera.
4.
Select the Vendor and Model of your network device from the Device Type list.
5.
Type a Device Name.
6.
Type the IP/URL address, Port#, User ID and Password of the device.
7.
Click Add.
8.
Double-click in the Channel field, and then select the Channel you want to assign to this camera.
9.
Click Apply.
Note Audio is not supported when using ONVIF as the Driver/Type when connecting to IP cameras. If audio is needed, select the native
integration method to connect the camera.
Connecting with Find Cameras
1.
On the Display screen, click Setup.
2.
Click Camera Setup, and then click IP Cameras.
3.
Click Find Camera to automatically find all connected Network cameras.
4.
Select the check box next to your desired camera.
5.
Type the User ID and Password of the device.
6.
Click Add Selected.
7.
The camera will appear in the Camera Setup tab.
8.
Double-click in the Channel field, and then select the Channel you want to assign this camera to.
9.
Click Apply.
Naming Camera Channels
OpenEye recommends assigning a descriptive name to each camera channel for easy identification of where the camera is located. To
name your IP camera channels, follow these instructions.
1.
On the Display screen, click Setup.
2.
Click Camera Setup, and then click IP Cameras.
3.
Click the Camera Setup tab.
4.
Double-click the Device Name column for the camera you want to name.
5.
Type a name for your camera.
6.
Click Apply to save the name.
32865AA
39
Advertisement
Table of Contents
