Storage Check
1.
Set up the General and Users tabs first.
2.
Click the Storage Check tab.
3.
Select Enable.
4.
Define the frequency of storage checks (in minutes).
5.
Select an additional Alert Option if desired: Beep or Popup Message.
6.
Add a Comment that will be seen in the email message if desired.
7.
Click Apply to save your settings.
Recording Data Check
1.
Set up the General and Users tabs first.
2.
Click the Recording Data Check tab.
3.
Select Enable.
4.
Define the frequency of data checks (in hours).
5.
Select the Action Method: Popup Message Alert, Beep Alert, or Email Alert.
6.
Add a Comment that will be seen in the email message if desired.
7.
Click Apply to save your settings.
32865AA
67