Table of Contents
Advertisement
ReportStar
9.
Set up the General and Users tabs first.
10. Click the ReportStar tab.
11. Select Use ReportStar.
12. Enter a numeric Security Code if desired (this is an additional security
measure to prevent unauthorized users from adding the recorder to their
Report Star account).
13. Define the Send Time to designate the time the recorder will send
updates to Report Star.
14. Select Send notification to Report Star on alarm events if you want
the recorder to report alarm events to Report Star.
15. Type a new MAC Address if necessary.
16. To set a custom time to send updates to ReportStar, select Custom
Day/Night, and then select your desired Day and Night times.
17. To send updates to a custom URL, select Send to Custom URL, and
then type in the URL.
18. Click Apply to save your settings.
SMART Information
The SMART Information tab displays Hard Drive
information.
32865AA
69
Advertisement
Table of Contents
