Table of Contents
Advertisement
ADVANCED PTZ SETUP
General
The General tab in PTZ Setup allows you to reverse PTZ direction function if necessary, enable the use of Onscreen Compass for PTZ
control, set the speed for your camera, and set the camera ID.
Reverse PTZ controls
Enable Onscreen Compass
PTZ status when closing PTZ
controls on recorder
Adjust Speed Settings
PTZ Address Settings
PTZ Address Settings
Some protocols support software address settings.
The RX-Addresses and ID settings are compatible with a particular line of receivers that support 2 ID addresses.
The PT Driver Address is associated with the PTZ ID address set on the camera. The addresses must match for the recorder
to communicate with the proper PTZ camera. This is especially important when a large number of PTZ cameras are connected
to the recorder.
Note To select a PT Driver Address of 129-256, manually enter the ID in the box.
32865AA
91
Advertisement
Table of Contents
