Table of Contents
Advertisement
Scheduled Screen Overview
The Scheduled Backup Screen is used for performing bulk backup of video recorded by all cameras on a regular scheduled basis (1-24
hours). The Scheduled Backup Screen is similar to the General Backup Screen.
Activating Scheduled Backup
In order to use the Scheduled Backup feature, you must first activate the function for your Server software. You only need to do this once
to enable scheduled backups.
1.
On the Live screen, click Exit, and then select Restart in Windows Mode.
2.
Click OK.
3.
Click Start, and then click vFormat.
4.
In the Need for Scheduled Backup area, click Confirm Windows System Password.
5.
Type your Windows System ID and Password.
Note The default ID is NVR Admin, and the default Password is NVR4321.
6.
Click OK.
7.
Close the NVR Utility window, and then double-click OpenEye Server to restart your Server software.
Specifying Scheduled Backup Drives
In order to use the Scheduled Backup feature one or more storage drives or partitions
connected to the recorder must be specified as a backup drive.
1.
From the Display screen, click Exit and choose Restart in Windows Mode.
2.
Click OK.
3.
Double-click My Computer.
4.
Right-click on the drive to specify as a backup drive for Scheduled Backup
and click Rename. Rename the drive to 'Backup'. Repeat this process for all
drives to use for Scheduled Backup. To remove a drive from use for
Scheduled Backup, change its name to something other than 'Backup'.
5.
Restart RADIUS and return to the Schedule tab in the Backup Center
window.
Note The C: Drive CANNOT be used as a backup location; this is done intentionally to
protect the operating system.
32865AA
99
Advertisement
Table of Contents
