Table of Contents
Advertisement
Data Management
The Data Management tab displays the partition scheme and health status of the Hard Disk Drives in the recorder. Use this tab to
troubleshoot a recorder, or verify the amount of Hard Drive storage installed. This function is native to the Windows operating system. For
more information about Disk Management, consult a Windows 7 manual.
Note Double-click a drive in the Use column to assign the drive a specific function (Record, Backup, or None). This function is for use
in software-only applications, and is not needed when using this software with a recorder.
File Management
1.
Click View File Info to view all file information.
2.
To export file info, click Export, and then browse to your desired location.
3.
Click Save.
4.
Click Close.
Storage Management
1.
Click Disk Management to access the Disk Management function of the Windows operating system.
2.
To view this window, close the Setup window, and then click Exit.
3.
Select Restart in Windows mode, and then click OK.
4.
For instructions regarding Windows Disk Management, please refer to a Windows 7 manual.
70
Advertisement
Table of Contents
