Table of Contents
Advertisement
Frame Setup (SHM & SH)
Reset to Default Settings
Number of Recording
Frames Selected
Camera Channel
Note The red FPS record slider cannot exceed the blue FPS capture slider
Note The software will not allow the maximum available frames to be exceeded.
Note Using H.264 software compression significantly increases the processing load on the OpenEye SHM and SH platforms. If
maximum analog PPS is desired in addition to IP video recording or multiple remote clients, OpenEye engineering recommends
the addition of the upgraded system CPU (NVR-CPU UPG).
Frame Select
Blue Slider: Set the frame rate to be recorded during intensive recording and available for viewing on a remote client PC.
Red Slider: Set the frame rate recorded by during normal recording.
Resolution
Adjusting resolution will affect the total number of frames per second that are available.
Codec
Select the appropriate codec for each camera: MJPEG, MPEG-4, or H.264.
Video Quality
Lower quality video has a smaller file size but appears more pixilated.
Sensitivity
Set the Keyframe refresh rate. Adjusting this setting can result in poor video quality.
Note Do not change the default setting unless instructed by a system administrator.
32865AA
Compression Codec
Video Quality
Frame Select
Recording Resolution
Sensitivi
ty
37
Advertisement
Table of Contents
