Table of Contents
Advertisement
Assigning Dual Streams
Dual stream support enables you to take advantage of two different streams from an IP camera. One stream can be high definition
forensic video, while the other stream can be a lower resolution for live display. This allows RADIUS or Remote Viewer software to
display more cameras while utilizing lower bandwidth and less CPU usage.
The second stream is used for motion detection in the server, which lightens the processing load for centrally-managed motion detection
configurations
Dual streaming functions are limited to cameras that support this feature.
1.
On the Display screen, click Setup.
2.
Click Camera Setup, and then click IP Cameras.
3.
Click the Camera Setup tab.
4.
Choose which camera you want to configure, and double-click the Record Stream column.
5.
Select which Stream you want to assign to be recorded.
6.
Double-click the Transmit Stream column and choose the appropriate stream for remote viewing.
7.
Click Apply to save your selections.
Removing a Camera
To remove a camera from your system, follow these instructions.
1.
On the Display screen, click Setup.
2.
Click Camera Setup, and then click IP Cameras.
3.
Click the Camera Setup tab.
4.
Right-click the camera you want to remove on the Network Cameras Currently in Use list, and then click Remove Device.
5.
Click Yes to finish removing the camera.
6.
Click Apply to save your settings.
40
Advertisement
Table of Contents
