Table of Contents
Advertisement
CONNECTION GUIDE
Connecting the Monitor
There are three available monitor outputs on the E-Series DVR.
•
Composite Monitor output for CCTV monitor – BNC (Marked MAIN)
•
Spot monitor output for CCTV monitor – BNC (Marked SPOT)
•
VGA output for VGA monitor – Mini-Sub D15
Video Inputs and Looping Outputs
The E-Series DVR comes with 4/8/16 BNC video inputs on the rear of its chassis. Each video
input has a corresponding looping BNC output for passing the video signal to another
monitoring/recording device.
Connecting to a Network
Use the RJ45 jack on the rear of the DVR when connecting to a network.
Connecting Audio
To record audio on the DVR connect the audio source to the connections on the audio ports
on the back of the DVR.
To listen to live or recorded audio connect the Audio Out Port to an amplified speaker system.
Note
29716AB
The DVR audio output is a line level source which requires an amplified speaker
system. The audio input can be from an amplified source or directly from an
amplified microphone.
23
Advertisement
Table of Contents
