ANALOG CAMERA SETUP
Selected
camera
display
Connect selected
camera to
associated sensors
Select Channel
Select the camera channel to be edited.
Selected Camera Display
View the live camera feed from the selected camera channel.
Sensor Connection
Specify which sensors to associate with the camera selected.
Camera Name
Specify the name of the selected camera.
Set Up New Camera
1.
Use a BNC cable to connect your camera to the rear of the recorder chassis.
2.
On the Display screen, click Setup.
3.
Click Camera Setup, and then click Analog Cameras.
4.
Click the General Camera tab.
5.
Select the channel that corresponds with the new camera from the Select Channel list.
6.
Enter a name for the camera in the Camera Title field.
7.
Adjust the Brightness, Hue and Contrast if necessary.
8.
Select the appropriate Sensor Connection camera.
9.
Click Apply to save your settings.
32865AA
Apply system defaults
to selected camera
Define camera name
Adjust
Brightness
Hue
Contrast
Apply current settings to all
cameras
Apply system defaults to all
cameras
35