Chapter 6 Setting The Parameters - Denso QB30-SR User Manual

Chapter 6 Setting the parameters
You can customize the scanner by modifying communications, code type, and other scanner parameters with the commands,
the QR-coded parameter menu or the configuration software QB Setting*. These parameters retain their settings even when the
power is off. The settings are not retained without sending SAVE command when you modify the parameters with the
commands.
(1) Scanning parameter setting QR Codes (QR-Coded parameter menu) by pressing the trigger switch.
(The QR-coded parameter menu is given in Chapter 17.)
(2) Using the configuration software (QB Setting) in your computer.
The configuration software is available via the RS-232C interface or USB-COM interface; it is not via the USB keyboard
interface.
The configuration software also offers batch-process QR code symbols for read by scanners in the field. Those symbols
printed can be scanned by the scanner via any of the RS-232C interface, USB-COM interface and USB keyboard interface.
Note: Configuration software (QB Setting) is unable to use when USB keyboard interface is selected.
(3) Using the command in your computer.
Operation setting is configured when you send the commands to the QB30 by communication from external devices such as a
computer.
* Registered users can download the configuration software (QB Setting) from QBdirect, their customer support section on
the Denso Wave website at no extra charge.
For further details on QBdirect or to register, visit the following URL.
http://www.qbdirect.net
16