Denso QB30-SR User Manual page 97

2d code scanner (fixed type)
Table of Contents

Advertisement

Items
Reading EAN-8
EAN-8 transmission of check
digit
EAN-8
Conversion
EAN-13 format
Reading UPC/EAN with 2-digit
add-on
Reading UPC/EAN with 5-digit
add-on
Reading UPC/EAN with add-on
only
Add-on check level
(Note 1) With the QR Code parameter menu, UPC-A, EAN-13, UPC-E, EAN-8 will be enabled/disabled at the same time.
(Note 2) The add-on check level can be set in order to prevent a digit scanning miss when performing add-on scanning.
Add-on check level: (Low) Disabled < Level 1 < Level 2 < Level 3 < Level 4 (High)
The scan time may increase by raising the add-on check level.
Interleaved 2of5
Items
Reading Interleaved 2of5
Minimum number of readable
digits
for Interleaved 2of5
Maximum number of readable
digits
for Interleaved 2of5
(Note 1) With the QR Code parameter menu, UPC-A, EAN-13, UPC-E, EAN-8 will be enabled/disabled at the same time.
Codabar (NW-7)
Items
Reading Codabar (NW-7)
Minimum number of readable
digits
for Codabar (NW-7)
Maximum number of readable
digits
for Codabar (NW-7)
Transmission of Start/Stop codes
for Codabar (NW-7)
Check digit method for Codabar
(NW-7)
The parameter setting ranges are different from the numbers of digits that the scanner can actually read.
(Note 1)
In the QR Code menu, Transmission of upper case letters are not permitted.
(Note 2)
Parameters
Enable
Disable
Enable
Disable
Enable
to
the
Disable
Enable
Disable
Enable
Disable
Enable
Disable
Disabled checking
Levels 1 to 4
Parameters
Enable, without a check digit
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Disable
2 to 99 digits
Parameters
Enable, without a check digit
Enable, with a check digit
(Check digit transmission enabled)
Enable, with a check digit
(Check digit transmission disabled)
Disable
3 to 99 digits
(including start/stop codes)
Transmit a/b/c/d
Transmit a/b/c/d
Disable
MOD-16
7-check method
Defaults
Defaults
4 digits
99 digits
Defaults
4 digits
99 digits
: Can be changed only with the configuration software.
86
Refer to:
Chapter 12
Sections 12.4
Refer to:
Chapter12
Section 12.4
(See Note 1.)
Refer to:
Chapter 12
Section 12.4
Chapter 12
Section 12.4

Advertisement

Table of Contents
loading

This manual is also suitable for:

Qb30-su

Table of Contents