Chapter 4 Parameters And Defaults - Denso QK11-U User Manual

Chapter 4 Parameters and Defaults

The table below lists the parameters and their default values. Note that the defaults
given below are values preset when the QK11-U leaves the factory. Some of the
communications parameters and readable bar code settings may have been modified
by dealers according to your needs.
You may change parameters given in the table below by using the QR-coded parameter
menu given in Chapter 5. QR-coded parameter menu will be stored in the memory of the
QK11-U.
Parameter group
Transmission
format
Setting 2D code
reading
Parameters
Header
Terminator
Transmission of code
ID mark
Transmission of no.
of digits
BCC
Reading MicroQR
Function
None
STX
ETX
CR
LF
CR LF
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
Disabled
Enabled
21
Factory defaults