Table of Contents
Advertisement
12.3 USB Keyboard Interface (QB30-SU)
The USB keyboard interface requires no dedicated device driver. Data read by the scanner can be entered to the cursor
position in your application.
The USB keyboard interface operates in conformity with the following:
- Universal Serial Bus (USB) Device Class Definition for Human Interface Devices (HID) Version 1.11
- Universal Serial Bus (USB) HID Usage Tables Version 1.11 keyboard
(1) CAPS Lock state
Select the CAPS Lock ON or OFF to match the state of the connected keyboard. (Default: CAPS Lock OFF)
(2) Keyboard type
Select the type of the connected keyboard. (Default: Type 101, US English)
(3) Numeric data transmission format
Select the "inboard numeric keys" or "numeric keypad" on the connected keyboard. (Default: Inboard numeric keys)
(4) Binary conversion
Select the conversion type to be applied to data read, from the following:
- "No conversion" (ASCII) (default)
- "Binary conversion"
- "Kanji conversion"
Binary conversion format
No conversion
Binary conversion
Kanji conversion
Note that some applications may fail to output converted data as it is displayed.
(5) Data transmission interval
Select the data transmission interval to be applied when the scanner sends data read to the host computer. There are seven
choices from 1 ms to 100 ms (default: 10 ms).
:Outputs 00h to 7Fh data in ASCII format bytewise. Selecting this parameter
does not output 80h to FFh data.
:Converts 00h to FFh data to binary format and outputs it bytewise.
:Converts 00h to FFh data to Shift-JIS format and outputs it, two bytes at a
time. If there is any data to which this Kanji conversion cannot apply, it
converts such data to binary format and outputs it bytewise instead.
Output data
No output
Scanning complete operation only.
8Ah BFh 8Eh 9Ah
Output with binary data 1 byte by 1 byte
Assigned characters
"Kanji"
Output with Kanji conversion (Note)
Note
53
Advertisement
Table of Contents
