Table of Contents
Advertisement
8.2.4
ADF script mode
The ADF script refers to a simple program language designed for editing of data read. It enables the following functions.
(1) Extracting data that is fixed or variable in length
(2) Supporting Application Identifiers (AIs) in GS1-128 (EAN-128), GS1 DataBar (RSS) and EAN.UCC Composite symbols
(3) Sorting data blocks into the specified order
(4) Collating data for verification
(5) Outputting same data repeatedly
(6) Performing four arithmetic operations including residue calculation, e.g., transformation of units
(7) Substituting data
(8) Comparing character strings
(9) Driving indicator LED and beeper
The ADF script mode can be programmed with the configuration software (QB Setting). To configure the scanner with the
ADF script, transfer the script to the scanner or generate an ADF script QR code symbol with the configuration software (QB
Setting) and use the scanner to read the symbol.
For the specifications and instructions for use of the ADF script, refer to the ADF Script User's Guide.
Note: The ADF script mode cannot be used together with any of other edit modes (data extraction mode, data substitution
mode, and data blocksorting mode).
37
Advertisement
Table of Contents
